5 Tips on How to Keep the Pests Away From Your Property 

Pests are not only annoying, they’re also disgusting. They lurk around the house, trying to build a home and feast on our foods. They carry germs and diseases with them, that’s why it’s not a good idea to just let them be there. If we spot a mouse, spider, cockroach, and others, our first impulse is to kill them. But we can avoid doing this by doing precautionary things that will keep them away from our property. How do you do this? Check out the following tips.  

Pests Away

Block Any Entries 

Pests, either big or small, will find a way to get into our properties. So to stop them from going into your house, you should block any forms of entry. One of the first lines of defense from keeping pets away from your property is sealing the cracks and gaps in your house. Any gap or crack you find in your doorway, window, screens and other modes of entry should be sealed or blocked. These forms of entry will become bigger in time if you don’t do anything about it. You can stop the pests from penetrating your house by doing this.  

Clean the Kitchen 

Pests and insects are attracted to foods. The number one reason they lurk around properties is to look for foods in the kitchen. Always clean the kitchen so you won’t attract the pests from coming in. Always make sure that the floor is clean, the trash is taken out and leftover food is properly kept out. It’s not just the kitchen that should be kept clean; you also have to make sure that the whole house is also clean.  

Get Rid of Standing Water 

One of the annoying and health risking pests/insects is mosquito. They bring hazard to our health, so you should make sure that they are kept out from your properties. Monitor the breeding ground, which is standing water. Check your yard or any part of your properties where there might be traces of water that’s possible for mosquitoes to start a family. Check the rain sprouts, leaks in the AC unit and any unused things outside your home.  

Inspect the Outdoor Furniture 

If you have a deck or patio, don’t also forget to check them out for any trace of spider webs and egg sacks. Pests and insect most likely build a home in places or furniture you don’t always check. Even those little corners you ignore are breeding ground for insects. Make sure that you include such inspection in your maintenance tasks.  

Hire a Pest Control Company 

If the pests or insects have already invaded your home and the situation is really bad, then you will need the service of a 5 Star Pest Control Company. They will conduct pest control to keep the bugs and rodents away from your house. If the situation is that worst and the problem always come back, then you will need a personalized plan. Such company will help you with that so your house is safe and protected from the pest infestation.  

Read More

When do you prune a tree?

Diseased, damaged and dead tree branches must be removed early on. If not, the most ideal time to prune your tree is during late winter and early spring months, just before the tree starts to the buds. Some trees like dogwood and maple will bleed sap during this time of the year. This bleeding must not harm them. While tree pruning may be performed anytime, it is always best to avoid extreme winter cold and very hot dry periods. If you do tree pruning once the leaves have opened, just make sure that you let their leaves be fully developed and some extra time in order to recoup the strength they used. 

Tree 

How do you perform tree pruning? 

Getting Started 

The first thing you need to consider prior to cutting a tree is to determine what and why it has to be pruned. Initially, you need to have a plan. Afterwards, decide what equipment or tools are to be used. Most tree pruning projects may be done with a pruning saw, loppers and hand pruners. 

HandPruners – There are two kinds of hand pruners, anvil and bypass.  bypass pruners cut similar to scissors. A sharp blade slides past the other sharp blade leading in one good clean cut. On the other hand, the cutting action of the anvil pruners is like a sharp blade cutting across a flat surface blade. As a matter of fact, this kind of action seems to crush the tissues on the underside of the stem. In addition to that, bypass pruners are usually recommended due to its clean cut. Crushing actually opens up plant tissues to infection.  

Pruning Saw The modern tri-edge folding saw is a replacement to an older and obsolete bow saw. This saw easily and quickly cuts wood up to 3 inches diameter. 

Loppers –There are also two kinds of loppers, anvil and bypass. Loppers have longer handles as well as larger blades which are designed to cut woods ¾ inch to 1 ½ inch in diameter. The one that is highly recommended between the two is the bypass lopper.

How to Cut 

The act of pruning is basically, wounding the tree. When done accordingly, tree pruning can help the trees. However, if done incorrectly, it will just put the trees in danger. Leaving a stab and flush cuts are two primary examples of a wrong tree pruning. 

Trees don’t heal wounds. When branches are cut off, they are gone. It does not grow another branch. Nonetheless, trees seal wounds. When pruned the right way, a callus is produced like a donut which starts at the edge and grows in until the callus wraps the cut. 

Inside a tree, a chemical boundary is made around the wounded area which compartmentalizes the wound. Furthermore, compartmentalization limits any decay which can occur from wounding the tree. 

Leaving on stabs and flush cuts cause wounds which will not compartmentalize or callus over. The tree will definitely start to rot in those areas.  To know more about this, Concrete contractor.

 Diseased, damaged and dead tree branches must be removed early on. If not, the most ideal time to prune your tree is during late winter and early spring months, just before the tree starts to the buds. Some trees like dogwood and maple will bleed sap during this time of the year. This bleeding must not harm them. While tree pruning may be performed anytime, it is always best to avoid extreme winter cold and very hot dry periods. If you do tree pruning once the leaves have opened, just make sure that you let their leaves be fully developed and some extra time in order to recoup the strength they used. 

How do you perform tree pruning? 

Getting Started 

The first thing you need to consider prior to cutting a tree is to determine what and why it has to be pruned. Initially, you need to have a plan. Afterwards, decide what equipment or tools are to be used. Most tree pruning projects may be done with a pruning saw, loppers and hand pruners. 

1. Hand Pruners – There are two kinds of hand pruners, anvil and bypass.  bypass pruners cut similar to scissors. A sharp blade slides past the other sharp blade leading in one good clean cut. On the other hand, the cutting action of the anvil pruners is like a sharp blade cutting across a flat surface blade. As a matter of fact, this kind of action seems to crush the tissues on the underside of the stem. In addition to that, bypass pruners are usually recommended due to its clean cut. Crushing actually opens up plant tissues to infection.  

2. Pruning Saw – The modern tri-edge folding saw is a replacement to an older and obsolete bow saw. This saw easily and quickly cuts wood up to 3 inches diameter. 

3. Loppers – There are also two kinds of loppers, anvil and bypass. Loppers have longer handles as well as larger blades which are designed to cut woods ¾ inch to 1 ½ inch in diameter. The one that is highly recommended between the two is the bypass lopper. 

How to Cut 

The act of pruning is basically, wounding the tree. When done accordingly, tree pruning can help the trees. However, if done incorrectly, it will just put the trees in danger. Leaving a stab and flush cuts are two primary examples of a wrong tree pruning. 

 Trees don’t heal wounds. When branches are cut off, they are gone. It does not grow another branch. Nonetheless, trees seal wounds. When pruned the right way, a callus is produced like a donut which starts at the edge and grows in until the callus wraps the cut. 

 Inside a tree, a chemical boundary is made around the wounded area which compartmentalizes the wound. Furthermore, compartmentalization limits any decay which can occur from wounding the tree. 

Leaving on stabs and flush cuts cause wounds which will not compartmentalize or callus over. The tree will definitely start to rot in those areas.  To know more about this, click here

Read More